Parker D3MW belongs to the D3 family of direct operated wet-armature solenoid directional valves, same ISO4401-05 (CETOP05 / NFPA D05 / NG10) mounting footprint as D3W.
Mounting standard: ISO4401, DIN24340 A10, NFPA D05
Structure: Direct spool actuation by wet armature solenoid; single or double solenoid, spring return / spring centered
Pressure rating:
P, A, B ports: 350 bar
T tank port: 210 bar (DC coil), 105 bar (AC coil)
Rated flow: Up to 150 L/min (DC); up to 115 L/min (AC)
Spool: Rich spool symbols (22+ spool options), 2-position / 3-position, closed centre, open centre, tandem centre etc.
Electrical: AC / DC coils, 100% continuous duty, surge suppression diode optional, multiple connector styles, manual override standard
Optional features: Soft-shift for smooth low-shock switching; spool position monitoring sensor; explosion-proof ATEX / IECEx certified variants
Seal: NBR standard, FKM/Viton optional
Filtration requirement: ISO 4406 18/16/13
Fluid: Mineral hydraulic oil, selected fire-resistant fluids
Application: Hydraulic presses, injection molding, machine tools, material handling, hydraulic power unit stack circuits, matched with NG10 SystemStak sandwich valves
Brief comparison
D3MW / D3W: NG10 (CETOP05), max 150 L/min, direct solenoid operated, standard industrial directional valve
D1VW: NG6 (CETOP03 / D03), smaller frame, lower flow
D31FC: Pilot operated proportional directional valve, electronic proportional control, not on/off switching
ch
English