Parker D101VL is the lever-operated variant inside the D101 high-flow directional valve family, together with D101VW (solenoid pilot), D101VA (air pilot), D10P (hydraulic pilot).
Mounting standard: ISO4401, NFPA D10, CETOP10 / NG32 manifold subplate
Structure: 2-stage pilot operated, 5-chamber cast body, case-hardened 4-land main spool
Pressure rating:
P, A, B ports: 207 bar (3000 psi)
Pilot supply: 4.4 ~ 207 bar, internal pilot or external pilot selectable
Drain port: Max 34 bar; external drain required for high tank pressure
Max rated flow: Up to 950 L/min (250 GPM, depends on selected spool)
Spool & return: 2-position / 3-position spool codes (001,003,004,008,011 etc.)
Spring return: Hand lever self-centres once released
Detent / latch option: Spool stays in selected position until manual re-operation
Lever assembly: Stainless steel lever parts, lever can be installed on left or right side
Standard feature: Built-in damping orifice for low-shock spool shifting; fast-shift orifice removal optional
Seal: NBR standard, FKM/Viton optional for fire-resistant fluids
Filtration requirement: ISO 4406 18/16/13
Fluid: Mineral hydraulic oil, water-glycol and selected synthetic hydraulic media
Application: Large hydraulic presses, metal forming equipment, heavy test benches, power station manual override, high-flow hydraulic machinery manual control
Brief comparison
D101VL: NG32, lever manual pilot operation, high flow manual control
D101VW: NG32, solenoid pilot operated, electric remote switching
D101VA: NG32, air pilot operated
D3L / D1VL: Smaller frame lever valves (NG10 / NG06), direct operated, not pilot two-stage
D31FC: Proportional valve with electronic closed-loop feedback
ch
English