HYDAC PGI102 Internal Gear Pump
Key Features
High-pressure heavy-duty internal gear pump, ultra-low pulsation, quiet running, radial + axial floating compensation. Suitable for high-pressure servo, die-casting, press and heavy-duty hydraulic systems.
Technical Data
· Displacement: 4.2 ~ 249.9 cm³/rev (Frame size 2 / 3 / 6)
· Rated pressure: 330 bar; Intermittent: 350 bar; Peak: 360 bar
· Speed range: up to 4200 rpm (depends on displacement)
· Recommended fluid: Mineral hydraulic oil; optimum viscosity 25–100 cSt
· Cleanliness requirement: ISO 20/17/14
Model Example
PGI102-3-080-RK05-11-N-6100
· 3: Frame size
· 080: 80 cc displacement
· RK05: Flange & port configuration
· 11: Version
· N: NBR seal
· 6100: Configuration code

Comparison of PGI Series
· PGI100: 1.6–25.2 cc, max 300 bar, ultra-compact small pump
· PGI101: 20–64.4 cc, max 250 bar, standard servo main pump
· PGI102: 4.2–249.9 cc, max 330 bar, high pressure & large flow
· PGI103: 65.3–249.9 cc, max 250 bar, continuous long-run operation
Partial model
PGI102-2-004-RK03-11-6100
PGI102-2-005-LK03-11-6100
PGI102-2-005-RK03-11-6100
PGI102-2-006-RK03-11-6100
PGI102-2-008-LK03-11-6100
PGI102-2-008-RK03-11-6100
PGI102-2-011-RK03-11-6100
PGI102-2-011-RK23-11-6100
PGI102-2-013-RK03-10-6100
PGI102-2-016-RA03-11-6100
PGI102-2-016-RK03-11-6100
PGI102-2-019-RA03-11-6100
PGI102-2-019-RK03-11-6100
PGI102-2-022-RK03-11-6100
PGI102-2-025-RK03-11-6100
PGI102-3-014-RK23-10-6100
PGI102-3-016-LK23-10-6100
PGI102-3-016-RK23-10-6100
PGI102-3-020-RK23-10-6100
PGI102-3-025-RK23-10-6100
PGI102-3-032-RK23-10-6100
PGI102-3-040-RK23-10-6100
PGI102-3-050-RK23-10-6100
PGI102-3-064-RA23-10-6100
PGI102-5-064-RA23-10-6100
PGI102-6-040-RK23-10-6100
PGI102-6-050-RK23-10-6100
PGI102-6-064-RK23-10-6100
PGI102-6-080-RA23-10-6100
PGI102-6-080-RK23-10-6100
PGI102-6-100-RA23-10-6100
PGI102-6-100-RK23-10-6100
PGI102-6-125-RA23-10-6100
PGI102-6-125-RK23-10-6100
PGI102-6-160-LK23-10-6100
PGI102-6-160-RK23-10-6100
PGI102-6-200-RK23-10-6100
PGI102-6-250-RK23-10-6100
ch
English