HYDAC PGI101 Internal Gear Pump
Key Features
Low noise, low pulsation, high volumetric efficiency. Widely used in servo hydraulic systems, injection molding and die-casting machines.
Technical Data
· Displacement: 20.0 ~ 64.4 cm³/rev (20/25/32/40/50/64 cc)
· Rated pressure: 250 bar; Intermittent: 320 bar; Peak: 325 bar
· Speed range: 1800 ~ 3600 rpm (lower max speed for larger displacement)
· Radial + axial floating compensation
· Recommended fluid: Mineral hydraulic oil; Optimum viscosity 25–100 cSt
· Cleanliness requirement: ISO 20/17/14
Model Explanation (Example: PGI101-3-020-RK03-11-N-6100)
· 3: Frame size
· 020: 20 cc displacement
· RK03: Flange & port configuration
· 11: Version
· N: NBR seal

PARTIAL MODEL
PGI101-3-020-RB23-10-6100
PGI101-3-020-RK23-10-6100
PGI101-3-020-RL23-10-6100
PGI101-3-025-RK23-10-6100
PGI101-3-025-RL23-10-6100
PGI101-3-032-LK23-10-6100
PGI101-3-032-RA23-10-6100
PGI101-3-032-RK20-10-6100
PGI101-3-032-RK23-10-6100
PGI101-3-040-RK20-10-6100
PGI101-3-040-RK23-10-6100
PGI101-3-050-RB23-10-6100
PGI101-3-050-RK23-10-6100
PGI101-3-064-RA23-10-6100
PGI101-3-064-RB23-10-6100
ch
English