Product Description
PNEUMAX 514 High Performance is an integrated-base NAMUR solenoid valve, compliant with VDI/VDE 3847. It is specially designed for direct mounting on NAMUR rotary actuators for ball valves, butterfly valves and dampers. Compared with traditional spool valves, it delivers higher flow performance and robust construction for harsh outdoor and process environments. Multiple actuation types are available: solenoid-spring return, solenoid-differential reset, double solenoid and pneumatic-pneumatic. ATEX certified versions are available for explosive hazardous areas. It is the plug-and-play variant against model 515 (without base plate).
Technical Data
l Mounting standard: NAMUR (VDI/VDE 3847)
l Port size: G1/4" or 1/4" NPT
l Functions: 3/2, 4/2, 5/2
l Orifice: 8 mm
l Flow rate: 1100 Nl/min @6 bar, Δp=1 bar, Cv=1.11
l Operating pressure: 2.5 ~ 10 bar, minimum pilot pressure 2.5 bar
l Media: Filtered compressed air; lubrication optional, continuous lubrication required if used
l Temperature range
u Standard: -10℃ ~ +50℃
u LT low temperature: -30℃ ~ +50℃
u ATEX version: -20℃ ~ +40℃
l Body material: Anodized aluminium with integrated base plate
l Seals: NBR standard, low-temperature NBR optional
l Coil options: B04:12VDC|B05:24VDC|B09:24VDC 2W low power B56:24VAC|B57:110VAC|B58:230VAC
l Protection class: IP65
l Certifications: ATEX 2014/34/EU, IECEx, FM, CSA; Ex ec / Ex mb / Ex ia, suitable for Zone 1/21, Zone 2/22
l Electrical connection: DIN43650 connector
l Weight: approx. 325 g
l Max tightening torque for G1/4 thread: 9 Nm
l Options: ATEX explosion-proof coil, manual override
Application
l Control NAMUR rotary actuators for ball valves, butterfly valves and dampers
l Process automation in chemical, water treatment, oil & gas, power and paper industries
l Field valve installation requiring fast assembly without extra base plate
l Outdoor and severe working conditions with dust and temperature variation
l Hazardous explosive zones (X514 ATEX models)
Typical Part Numbers
M514.52.00.39.B05 (5/2, solenoid-spring return, 24VDC, standard)
514/N.52.00.36.B05 (5/2, solenoid-differential reset, 24VDC)
M514.42.00.39.B05 (4/2, solenoid-spring return, 24VDC)
M514.52.00.39.B05-LT (low temperature version)
X514.52.00.39.C05 (ATEX explosion-proof, 24VDC)
Selection Comparison
Item | 514 High Performance | 515 High Performance | General 400 series solenoid valve |
Base plate | Integrated, plug & play | Supplied without base plate | Separate manifold base |
Interface | NAMUR for rotary actuator | NAMUR for rotary actuator | General pneumatic circuit |
Flow rate | 1100 Nl/min | 1100 Nl/min | 620~7500 Nl/min (depends on size) |
Certification | ATEX / IECEx / FM / CSA | ATEX / IECEx / FM / CSA | ATEX optional |
Best for | Fast on-site installation of process valves | Customer self-matched base assembly | Linear cylinder automation |
ch
English