ch
English
Series 514/N
The 514/N Solenoid valves, are 2 stage valves actuated electro-pneumatically. A series300directly operated solenoid valve actuates pneumatically the principal power distributor.
Everything is well integrated in a practical configuration that also permits applications where there is limited space. Used primarily to operaterotary actuators and wherever there isa NAMUR standard installation plan.
The pilot air is normally taken from the inletport (auto feed) and the only actuating signal is electric.
The range of the solenoid valves, as far as dimensions and mechanical construction, is similar to series 200.We have therefore solenoid valves G14"with identical pneumatic characteristics that are,however, actuated electrically.They have a balanced spool, insentive to presence or absence of pressure.
They are constructed in 3 and 5 way with 1solenoid (monostable) or 2 solenoids (bistable).
Construction characteristics | |
Body | Aluminium |
Spacers | Technopolymer |
Seals | NBR |
Springs | Spring steel |
Operators | Aluminium |
Spools | Nickel plated steel |
Screws | Zinc plated steel |
Solenoid-Differential
Operational characteristics | |
Fluid | Filtered air. No lubrication needed,if applied it shall be continuous |
Max. working pressure (bar) | 10 |
Temperature °C | -10…+50 |
Flow rate at 6 bar with Δp=1 (NL/min) | 1030 |
Orifice size (mm) | 7 |
Working ports size | G 1¼" |
Ordering code:
514/N.32.0.12.M2
514/N.52.0.12.M2
32:3 WAYS, TWO POSITIONS
52:5 WAYS, TWO POSITIONS