Wenglor Fork Sensor for Label Detection (P4HJ optical / U3HJ ultrasonic label fork), integrated U-shaped through-beam fork dedicated for label gap detection. P4HJ IR optical fork, fork opening 5 mm, high switching frequency, teach-in key, M8 connector. U3HJ ultrasonic fork, 6 mm opening, IO-Link 1.1, detects transparent, black, glossy labels independent of colour and substrate, min detectable gap 2 mm. Push-pull PNP/NPN NO/NC selectable. Supply 12–30 VDC, IP67, -10~60℃. For flexible packaging rotary cutter, label registration, film web tracking, double-layer label check, original Wenglor
Features at a Glance
Easy setup via teach-in
Detection of dark, transparent or printed labels
Flexible output settings (PNP/NPN, NC/NO)
High switching frequency
Ultrasonic Data
Fork Width 3 mm
Smallest Detectable Gap 2 mm
Ultrasonic Frequency 300 kHz
Electrical Data
Supply Voltage 12 ... 30 V DC
Current Consumption (Ub = 24 V) < 45 mA
Switching Frequency 400 Hz
Response Time 1.25 ms
Temperature Range 0 ... 50 °C
Switching Output Voltage Drop < 1.5 V
Switching Output/Switching Current 250 mA
Short Circuit Protection yes
Reverse Polarity Protection yes
Protection Class III
Notes:
Family: P4HJ optical label fork; U3HJ ultrasonic label fork (label dedicated forks)
U1HJ001 old ultrasonic model is discontinued, only spare supply
Compare: P4HJ = low cost optical; U3HJ = universal ultrasonic for difficult glossy/transparent labels
Compare: general YH/P1HJ fork sensors detect object occlusion, not label/liner attenuation difference
Notes;Not all information are shown.Contact Wenglor engineers for assistance.
ch
English