Description:
IO-Link is the communication between the sensor/actuator (IO-Link device) and an IO-Link master based on a point-topoint interface.
This technology has been integrated into the pressure switch series EDS 820.
The advantages: Process data, parameters and diagnostic information of the pressure switch can be transmitted via a standard cable (SDCI mode). An integrated LED display provides information on the operating mode and the switching statuses.
Simple exchange – the IO-Link master saves the parameters of the connected pressure switch and transmits them to the newly connected pressure transmitter when replaced. Thus, time-consuming new parameterisations will no longer be required. If IO-Link is not used, the sensor functions as a pressure switch with two switching outputs (SIO mode).
To create customer-specific small series or to duplicate sensor settings across the system, the sensor can also be easily adjusted outside the system to suit the particular application, with the HYDAC Programming Device HPG P1-000, the HYDAC Programming Adapter ZBE P1-000 or by means of the Portable Data Recorder HMG 4000.
Typical fields of application are machine tools, handling and assembly automation, intralogistics or the packaging industry
Models:
EDS824-F31-0016-000
EDS824-F31-0025-000
EDS824-F31-0040-000
EDS824-F31-0060-000
EDS824-F31-0100-000
EDS824-F31-0250-000
EDS824-F31-0400-000
EDS824-F31-0600-000