Temperature Switch ETS 1700

Description: 

The electronic temperature switch ETS 1700  is used mainly together with the temperature  probe TFP 100, which was specially  developed for tank mounting. The 4-digit display can indicate the actual  temperature, one of the switch points or the  maximum temperature value. The maximum temperature indicates the  highest temperature which has occurred  since the unit was switched on or was last  reset. The four switching outputs can be used  to control heating and cooling processes  in hydraulic systems, for example. Four  switch and switch-back points which are  independent of each other can be adjusted  very simply via the key pad. For integration into monitoring systems (e.g.  with PLC), an analogue output (4 .. 20 mA or  0 .. 10 V) is also available.

Setting options: 

The microprocessor integrated into the  ETS 1700 enables many useful extra  functions in addition to the switching functions,  when compared with a normal mechanical  temperature switch. It is possible, for example,  to activate switching delay times or to change  the relay switching direction. All settings are  made via the key pad.

Setting ranges of the switch  points and  switch-back hystereses:

● Switch point, relay 1 .. 4:  1.5 .. 100 % of the measuring span 

● Switch-back point, relay 1 .. 4:  1 .. 99 % of the measuring span or  alternatively 

● Switch-back hysteresis 1 .. 4: 1 .. 99 % of the measuring span

Additional functions: 

● Switching direction of the relays 1 .. 4  (N/C or N/O function) 

● Switch-on delay, relays 1 .. 4 in the range  0.0 .. 900.0 seconds 

● Switch-off delay, relays 1 .. 4 in the range  0.0 .. 900.0 seconds

● Switch-back mode (alternatively switch-back  point or switch-back hysteresis) 

● Display of the actual temperature, a switch  point or the peak value 

● Measuring range individually selectable  in °C or °F 

● Display of the measurement unit (°C, °F) 

● Analogue output (4 .. 20 mA or 0 .. 10 V) 

● Programming lock