ch
English
SystemStak™ Valves Size 3, ISO 4401-03; NFPA-D03; 315 bar (4500 psi); 60 L/min (15.7 USgpm), DGMC D03, DGMX2 D03, DGMR D03
Build a Compact, Cost-Effective, Reliable Hydraulic System with Vickers SystemStakTM Valves
Reduces System Space Requirements
SystemStak valves make compact hydraulic systems in which specific function valves are “sandwich” mounted between a directional valve and a standard mounting surface.
Reduce Cost
SystemStak valves eliminate intervalve piping and leak-prone tube and pipe connections. Installed cost is less than when using conventional valves.
Versatile and Easy to Install
SystemStak valves have all the internal passages necessary to serve the directional valve topping them. Mounting surfaces and port patterns are to international standards: any valve conforming to ISO 4401 size 03; ANSI/B93.7M size D03; NFPA-D03; CETOP 3; and DIN 24340, NG6 mounting interface can be used with these SystemStak valves.
Rugged and Reliable
Internal working parts are produced from hardened steel and mounted in ductile (spheroidal graphite) iron bodies. Excellent reliability is ensured. Working parts are accessible without removing valves from an assembled stack.
Operating Data
Maximum flow rate ------------------------60 L/min (16 USgpm)
Maximum operating pressure ----------315 bar (4500 psi)
Mass, Approximate:
DGMC ------------------------1.3 kg (2.9 lb)
DGMC2 ------------------------2,5 kg (5.5 lb)
DGMR(1 ------------------------1.3 kg (2.9 lb)
DGMX ------------------------1.3 kg (2.9 lb)
DGMDC ------------------------1 kg (2.2 lb)
DGMPC ------------------------0,8 kg (1.8 lb)
DGMFN ------------------------1,1 kg (2.2 lb)