ch
English
KSEM™ Modular Drill System
Primary Application
The KSEM™ modular drill system offers extended length and drilling diameters beyond the KenTIP™ modular drill system. The KSEM system enables very aggressive feed rates in many applications to enable very high productivity levels. It offers a very robust pocket for its exchangeable inserts to increase tool life for both steel holder and carbide tip. This makes the KSEM system a very economic and reliable system for drilling in the intermediate diameter range. Hole depths of 10 x D and drilling diameters from 12,5–35mm (.4921–1.5748") are covered by our standard tooling range. Various grades are available for drilling applications in almost any materials.
Features and Benefits
HP Drill-Point styles
• Low thrust prevents workpiece flexing.
• Excellent centering capabilities.
• Application specific selection of geometries for unmatched performance.
Strong Pocket, Easy Insert Change
• Robust pocket design for increased insert and holder life.
• Four-wall pocket provides insert stability.
• Requires only a simple wrench for insert removal.
Regrindable Inserts
• All geometries except SPL can be reconditioned to improve tool economy.
• Quick and reliable regrinding services offered by Kennametal and our partners.
Tailored Grades
•KC7315™ grade TiAlN-based PVD multilayer coating for high cutting speeds, primarily in steel applications.
• KCPM45™ grade multilayer TiAlN coated, very tough carbide substrate. Improved chipping resistance in demanding machining conditions.
• KC7320™ grade AlTiN-based PVD coating for the demands of drilling stainless steels.
Drill Body Portfolio
• Standard 3, 5, 7, and 10 x D tool bodies with round shanks (inch) and Whistle Notch shanks (metric) available.
• Flanged shanks with 2 flats and entry for external coolant supply in 3 x D.
• Only selected KSEM bodies included in First Choice program.
KSEM ST LINE MODULAR DRILL SYSTEM KSEM KCPM5 TM
• KSEM KCPM45™ HPG cutting edges provide increased productivity and improved tool life in steel in difficult conditions.
• HPG geometry works with low cutting and feed forces and provides very good centering. Reinforced cutting edges and good chip forming improve tool life due to high wear and edge chipping resistance.
• KCPM45 combines a very tough, fine-grain carbide substrate with an advanced multilayer TiAlN coating. It is capable of machining steel even in the most demanding conditions.
• Material snap back, stacked plates, cross holes, and inclined exits are some examples of where KCPM45 HPG edges will do a great job in your operations. • Use KCPM45 HPG cutting edges as an effective alternative in stainless steel as well
Inserts
KSEM1250HPGM
KSEM1270HPGM
KSEM1280HPGM
KSEM1293HPGM
KSEM1300HPGM
KSEM1350HPGM
KSEM1360HPGM
KSEM1380HPGM
KSEM1389HPGM
KSEM1400HPGM
KSEM1410HPGM
KSEM1429HPGM
KSEM1450HPGM
KSEM1468HPGM
KSEM1500HPGM
KSEM1508HPGM
KSEM1550HPGM
KSEM1580HPGM
KSEM1588HPGM
KSEM1600HPGM
KSEM1609HPGM
KSEM1620HPGM
KSEM1627HPGM
KSEM1650HPGM
KSEM1667HPGM
KSEM1700HPGM
KSEM1707HPGM
KSEM1746HPGM
KSEM1750HPGM
KSEM1786HPGM
KSEM1800HPGM
KSEM1826HPGM
KSEM1850HPGM
KSEM1865HPGM
KSEM1900HPGM
KSEM1905HPGM
KSEM1920HPGM
KSEM1923HPGM
KSEM1925HPGM
KSEM1927HPGM
KSEM1945HPGM
KSEM1950HPGM
KSEM1965HPGM
KSEM1984HPGM
KSEM2000HPGM
KSEM2024HPGM
KSEM2050HPGM
KSEM2064HPGM
KSEM2100HPGM
KSEM2143HPGM
KSEM2150HPGM
KSEM2183HPGM
KSEM2200HPGM
KSEM2223HPGM
KSEM2244HPGM
KSEM2250HPGM
KSEM2300HPGM
KSEM2342HPGM
KSEM2350HPGM
KSEM2370HPGM
KSEM2381HPGM
KSEM2400HPGM
KSEM2450HPGM
KSEM2461HPGM
KSEM2500HPGM
KSEM2540HPGM
KSEM2550HPGM
KSEM2560HPGM
KSEM2565HPGM
KSEM2567HPGM
KSEM2572HPGM
KSEM2581HPGM
KSEM2600HPGM
KSEM2619HPGM
KSEM2650HPGM
KSEM2659HPGM
KSEM2700HPGM
KSEM2750HPGM
KSEM2778HPGM
KSEM2800HPGM
KSEM2818HPGM
KSEM2835HPGM
KSEM2850HPGM
KSEM2858HPGM
KSEM2900HPGM
KSEM2937HPGM
KSEM2950HPGM
KSEM2977HPGM
KSEM3000HPGM
KSEM3016HPGM
KSEM3050HPGM
KSEM3096HPGM
KSEM3100HPGM
KSEM3115HPGM
KSEM3150HPGM
KSEM3175HPGM
KSEM3200HPGM
KSEM3250HPGM
KSEM3254HPGM
KSEM3300HPGM
KSEM3334HPGM
KSEM3350HPGM
KSEM3400HPGM
KSEM3450HPGM
KSEM3493HPGM
KSEM3500HPGM
KSEM3600HPGM
Drills
KSEM125ST090SFP16M
KSEM136ST090SFP16M
KSEM140ST110SFP20M
KSEM146ST110SFP20M
KSEM158ST110SFP20M
KSEM170ST110SFP20M
KSEM180ST110SFP20M
KSEM181ST110SFP20M
KSEM190ST110SFP20M
KSEM200ST110SFP20M
KSEM210ST110SFP20M
KSEM220ST110SFP20M
KSEM221ST130SFP25M
KSEM230ST130SFP25M
KSEM240ST130SFP25M
KSEM241ST130SFP25M
KSEM250ST130SFP25M
KSEM260ST130SFP25M
KSEM261ST130SFP25M
KSEM280ST130SFP25M
KSEM281ST150SFP32M
KSEM300ST150SFP32M
KSEM301ST150SFP32M
KSEM320ST150SFP32M
KSEM321ST150SFP32M
KSEM330ST150SFP32M
Hydraulic chucks
CV 40 SERIES
CV40BHCP16190M
CV40BHCP20170M
CV40BHCP25150M
CV40BHCP32130M
DV40 SERIES
DV40BHCP16190M
DV40BHCP20170M
DV40BHCP25150M
DV40BHCP32130M
BT40 SERIES
BT40BHCP16190M
BT40BHCP20170M
BT40BHCP25150M
BT40BHCP32130M
HSK80 SERIES
HSK80AHCP16190M
HSK80AHCP20170M
HSK80AHCP25150M
HSK80AHCP32130M